10 foot wide x 10 foot high roll up garage door models all of our available models in the 10 foot wide by 10 foot high size range.
10 foot garage door rough opening.
A garage will need backroom that equals the door height plus 18 inches and possibly more.
Standard garage doors in our area are 8 9 16 and 18 wide.
Width of garage door opening standard widths are 8 9 10 12 14 16 17 and 18 height of the garage door opening standard residential heights are 7 7 6 8 header the header is ideally a minimum 12 wide micro laminated beam that spans the width of the garage door opening.
Ordering a garage door based on a rough opening size can leave you with a door that is too big.
In our business we refer to rough openings as the size of the opening before the finished lumber has been added to the jambs.
To make my.
1 2 or 1 in one direction of the other will won t typically cause you to have to shop for a non standard garage door size.
If it s 9ft the opening must be 9ft 3 inches and so on.
The rough opening is equal to the size of the door but you need to figure back head and side room before choosing and installing the new garage door.
Choosing a garage door size.
Measure the backroom the distance from the garage door opening to the back wall of the garage.
99 of the residential garage doors that we run across are different than these widths.
Therefore making the width of the garage door rough opening the same size as the door would be fine if you are going to use a thin layer of stucco vinyl siding or 1 by lumber.
There is no standard garage door size.
Our partners at clopay offer custom garage doors in a variety of sizes.
So if you have a bedroom door that is 30 wide which is considered a 2 6 or 2 6 door just add 2 to the width and frame it 32 wide.
However a single garage door at eight to nine feet wide and seven to eight feet high is a common measurement for many homes.
Step 1 measure the old door if you are replacing an existing door with one of the same size or the new door of choice if you are building a new garage.
Words like rough opening are thrown around and i m not sure if we are speaking about the same thing.
The width of the rough opening should be 3 inches greater than the width of the garage door you are purchasing.
The height is 80 which is considered 6 8 or 6 8 add 2 1 2 to the actual door height and frame it 82 1 2.
Now all you need to know is how to properly frame your door rough opening.
This is a collection of our door models available in size of 10 wide by 10 high this also covers rough openings ranging from 9 1 to 9 11 in width and 9 1 to 9 11 in height.
For instance if the width of the garage door is 8ft the rough opening should be 8ft 3 inches wide.
However if you are putting bricks thick river rock stones marble or anything else on both sides that is more than 1 thick you will want the rough opening the same.
You get the picture.